Natural Rotary Cut Okoume Veneer Sheetfor Plywood Blockboard MDF and Furniture
|Thickness||0.18mm /0.22 / 0.25mm / 0.35mm/0.4mm|
|Veneer Type||Natural Wood Veneer|
|Grade||Face A/B, Face C, Back A, Back B|
1. Rotary cut okoume veneer, also called peeled okoume/okume
2. Size: 4’ x 8’ x 0.18mm /0.22mm /0.25mm /0.35mm/0.4mm.
3. Grain: wild grain.
4. Veneer Type: Natural Wood Veneer
5. It is mainly applied to the surface of the furniture, plywood,
MDF, chipboard and block board, etc.
Natural Rotary Cut Okoume Veneer Sheet With Ab Grade For Plywood
Rotary cut okoume veneer, also called Gaboon veneer, originated
from the Gabon and Congo-Brazzaville of Africa, is a hardwood
veneer mainly used for furniture surface making and plywood.
The grain of okoume veneer is straight and shallowly interlocked,
sometimes wavy, and its texture medium.
Rotary cut will yield veneer with a broad grain pattern with no
plain sliced or quartered appearance. This process yields the most
rotary veneer per log and is usually less expensive than sliced
Rotary cut okoume veneers are used in the majority of panels
produced in Asia. Rotary okoume veneer is also used in the
manufacture of quality utility plywoods, such as marine plywood or
as a face option for light weight plywood, and is also used as a
low cost balancer where a veneered panel only requires one
decorative face veneer.
African Okoume is the world’s most competitively priced, good
specification timber suitable for veneering available in the market
Natural colour: light salmon to dark pink, darkening when exposed
to light. Fine to medium texture. Slightly interlocked to
interlocked grain. Fine silver grain.
Rotary cut okoume veneer is a product applied to the surface of the
furniture to give it the appearance of being made of solid okoume
lumber. It also know as plywood, MDF, chipboard and block board,